📄 Likuma teksts
Par Konvencijas pielikuma grozījumu spēkā stāšanos
Uzmanību! Jūs lietojat neatbilstošu interneta pārlūkprogrammu.
Lai varētu lietot visas Likumi.lv piedāvātās iespējas, piedāvājam BEZ MAKSAS ielādēt jaunāku pārlūkprogrammas versiju. Iesakām izmēģināt arī vietnes MOBILO VERSIJU - m.likumi.lv (piemērota arī mazāk jaudīgiem datoriem).
nerādīt turpmāk šo paziņojumu
Apstiprināt
Paldies par viedokli!
Rādīt vēlāk
LATVIJAS REPUBLIKAS TIESĪBU AKTI
veidi
tēmas
visvairāk skatītie
jaunākie
LV
EN
uz sākumu
meklēt
Izvērstā meklēšana
Noklusējuma vērtības
Izvērstā meklēšana
Kā meklēt?
Meklēt nosaukumā
meklēt locījumos
meklēt frāzi
Meklēt tekstā
meklēt locījumos
meklēt frāzi
Izdevējs
Veids
nemeklēt grozījumos
Pieņemts
Stājas spēkā
Dokumenta Nr.
līdz
līdz
Publicēts LV
Zaudējis spēku
Redakcija uz
līdz
līdz
Statuss:
spēkā esošs
vēl nav spēkā
zaudējis spēku
meklēt
notīrīt
Ārlietu ministrijas dienesta
informācija Nr.41/897-6716
Rīgā 2007.gada 27.jūlijā
Par Konvencijas pielikuma
grozījumu spēkā stāšanos
Ārlietu ministrija nosūta
publicēšanai 1980.gada 9.maija Konvencijas par
starptautiskajiem dzelzceļa pārvadājumiem (COTIF) B papildinājuma
"Vienotie noteikumi Līgumam par kravu starptautiskajiem
pārvadājumiem (CIM)" I pielikuma "Bīstamo kravu starptautisko
dzelzceļa pārvadājumu noteikumi (RID)" grozījumus.
Grozījumi stājās spēkā 2007.gada
1.janvārī.
Konvencijas teksta tulkojums
latviešu valodā publicēts laikrakstā "Latvijas Vēstnesis"
1999.gada 26.jūnijā, Nr.208/209 (1668/1669).
Ārlietu ministrijas Juridiskā
departamenta direktora p.i. I.Bīlmane
Acts whose
publication is obligatory
Publication in accordance with
Article 1 of Commission Directive 2006/xx/EC1 adapting for the
seventh time to technical progress Council Directive 96/49/EC2 on
the approximation of the laws of the Member States with regard to
the transport of dangerous goods by rail3
1 January 2007 edition of RID
(Amendments to 1 January 2005
edition only)
1 january 2007
edition of RID
Amendments to
RID
for entry into
force on 1 January 2007
TABLE OF CONTENTS
1.6.4 Amend to read as
follows:
"1.6.4 Tank-containers,
portable tanks and MEGCs".
6.1.4.6 Amend to read as
follows:
"6.1.4.6 (Deleted)".
6.1.5.7 Replace
"61 °C" with:
"60 °C".
6.5.1 Amend to read as
follows:
"General requirements".
6.5.1.5 Delete.
6.5.1.6 Delete.
6.5.3 and
6.5.3.1 to
6.5.3.6 become 6.5.5
and 6.5.5.1 to 6.5.5.6.
Insert a new section 6.5.3 as
follows:
"6.5.3 Construction
requirements
6.5.3.1 General
requirements".
6.5.4 and
6.5.4.1 to
6.5.4.13 become
6.5.6 and 6.5.6.1 to 6.5.6.13.
6.5.4.14 Delete.
Insert a new section 6.5.4 as
follows:
"6.5.4 Testing,
certification and inspection".
PART 1
Chapter 1.1
1.1.3.1 Amend paragraph (d)
to read as follows:
"(d) the carriage undertaken by or
under the supervision of the emergency services, insofar as such
carriage is necessary in relation to the emergency response, in
particular carriage undertaken to contain and recover the
dangerous goods involved in an incident or accident and move them
to a safe place;"
Add a new sub paragraph (f) to
read as follows:
"(f) the carriage of uncleaned
empty static or storage vessels and tanks which have contained
gases of Class 2 groups A, O or F, substances of Class 3 or Class
9 belonging to packing group II or III or pesticides of Class 6.1
belonging to packing group II or III, subject to the following
conditions:
- All openings with the exception
of pressure relief devices (when fitted) are hermetically
closed;
- Measures have been taken to
prevent any leakage of contents in normal conditions of carriage;
and
- The load is fixed in cradles or
crates or other handling devices or to the wagon or container in
such a way that they will not become loose or shift during normal
conditions of carriage.
This exemption does not apply to
static or storage vessels and tanks which have contained
desensitized explosives or substances the carriage of which is
prohibited by RID."
1.1.3.2 Amend paragraph (d)
to read as follows:
"(d) gases contained in the
equipment used for the operation of the vehicle (e.g. fire
extinguishers), including in spare parts (e.g. inflated pneumatic
tyres); this exemption also applies to inflated pneumatic tyres
carried as a load;"
Delete paragraph (f). Current
paragraph (g) becomes paragraph (f).
1.1.4.1.3 Replace
"consignment note" with:
"transport document".
1.1.4.2.1 In the last
sentence replace "classes 1 to 8" with:
"classes 1 to 9".
1.1.4.3 In the title insert
"IMO type" before "portable tanks".
In the first sentence, replace
"Portable tanks" with "IMO type portable tanks (types 1, 2, 5 and
7)".
In the first sentence, replace
"(Amdt. 30-00)" with:
"(Amdt. 33-06)".
Add a reference to a footnote 1 at
the end. The footnote 1 will read as follows:
"1 The International
Maritime Organization (IMO) has issued "Guidance on the Continued
Use of Existing IMO Type Portable Tanks and Road Tank Vehicles
for the Transport of Dangerous Goods" as circular DSC.1/Circ.12
and Corrigenda. Copies of this guidance can be found on the IMO
website at: www.imo.org."
Current footnotes 1 to 9 become 2
to 10.
1.1.4.4 Amend the first
sentence of the Note to read as follows:
"For the placarding and
orange-coloured marking of wagons used in piggyback transport,
see 5.3.1.3.2 and 5.3.2.1.6."
In the second sentence of the
Note, replace "consignment note" with:
"transport document".
Chapter 1.2
1.2.1 Add the following
definitions in alphabetical order:
"ASTM" means the American
Society for Testing and Materials (ASTM International, 100 Barr
Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959,
United States of America);"
"Capacity of shell or shell
compartment", for tanks, means the total inner volume of the
shell or shell compartment expressed in litres or cubic metres.
When it is impossible to completely fill the shell or the shell
compartment because of its shape or construction, this reduced
capacity shall be used for the determination of the degree of
filling and for the marking of the tank.
"CGA" means the Compressed
Gas Association (CGA, 4221 Walney Road, 5th Floor, Chantilly VA
20151-2923, United States of America);"
"ICAO" means the
International Civil Aviation Organization (ICAO, 999 University
Street, Montreal, Quebec H3C 5H7, Canada);"
"IMO" means the
International Maritime Organization (IMO, 4 Albert Embankment,
London SE1 7SR, United Kingdom);"
"OTIF" means the
Intergovernmental Organization for International Carriage by Rail
(OTIF, Gryphenhübeliweg 30, CH-3006 Bern, Switzerland);"
"Tank record" means a file
containing all the important technical information concerning a
tank, a battery-wagon or a MEGC, such as certificates referred to
in 6.8.2.3, 6.8.2.4 and 6.8.3.4."
"Transport document" means
the consignment note in accordance with the Contract of Carriage
(see Uniform Rules Concerning the Contract of International
Carriage of Goods by Rail (CIM - Appendix B to COTIF)), the
consignment note in accordance with the Contract of Use (see
Uniform Rules concerning Contracts of Use of Vehicles in
International Rail Traffic (CUV - Appendix D to COTIF)) or
another transport document meeting the provisions of section
5.4.1."
"UIC" means the
International Union of Railways (UIC, 16 rue Jean Rey, F-75015
Paris, France);"
"UNECE" means the United
Nations Economic Commission for Europe (UNECE, Palais des
Nations, 8-14 avenue de la Paix, CH-1211 Geneva 10,
Switzerland);"
In the definition of "Aerosol
or aerosol dispenser", insert "under pressure" after
"liquefied or dissolved".
In the definitions of
"CSC", "IMDG Code" and "Offshore bulk
container", print "IMO" in italics.
In the definition of
"Hermetically closed tank", the second and fourth indents,
replace "as allowed by special provision TE15 of 6.8.4" with:
"in accordance with the
requirements of 6.8.2.2.3" at the end.
In the definition of "ICAO
Technical Instructions", print "ICAO" in italics.
In the definition of "Manual of
Tests and Criteria", replace "(ST/SG/AC.10/11/Rev.4)"
with:
"(ST/SG/AC.10/11/Rev.4 as amended
by document ST/SG/AC.10/11/Rev.4/Amend. 1)".
In the definition of
"Overpack", replace "by a single consignor" with "(by a
single consignor in the case of Class 7)".
In paragraph (a), replace
"plastic" with "plastics".
In the definition of
"Remanufactured IBC", replace "6.5.4.1.1" with:
"6.5.6.1.1".
In the definition of "UN Model
Regulations", replace "thirteenth" with:
"fourteenth" and
"(ST/SG/AC.10/1/Rev.13)" with:
"(ST/SG/AC.10/1/Rev.14)".
Chapter 1.3
1.3.2.2.2 (a) Amend the
beginning of the first indent to read:
"- how to access the necessary
information …".
1.3.2.4 Replace "the
radiation hazards involved and" with:
"radiation protection
including".
Replace "to ensure restriction of
their exposure and that" with:
"to restrict their occupational
exposure and the exposure".
Chapter 1.4
1.4.2.1.1 (b) Replace
"consignment notes" with:
"transport documents".
1.4.2.2.1 In footnote 6)
(current footnote 5)), delete the second sentence.
Insert a new 1.4.2.2.5 to read as
follows:
"1.4.2.2.5 The carrier
shall ensure that the manager of the railway infrastructure being
used is able to obtain at any time during carriage rapid and
unrestricted access to the information allowing him to meet the
requirements of 1.4.3.6 (b).
Note: The arrangements by
which the data are provided shall be laid down in the rules for
using the railway infrastructure."
1.4.3.3 Add a new paragraph
(j) to read as follows:
"(j) he shall, when filling wagons
or containers with dangerous goods in bulk, ascertain that the
relevant provisions of Chapter 7.3 are complied with."
1.4.3.6 Amend to read as
follows:
"1.4.3.6 Railway infrastructure
manager
In the context of 1.4.1, the
railway infrastructure manager has in particular the following
obligations. The railway infrastructure manager
(a) shall ensure that internal
emergency plans for marshalling yards are prepared in accordance
with Chapter 1.11;
(b) shall ensure that he has rapid
and unrestricted access to the following information at any time
during carriage:
- composition of the train,
- UN numbers of the dangerous
goods being carried,
- position of these wagons in the
train,
- weight of the load,
This information shall only be
disclosed to those parties that require it for safety, security
or emergency response purposes.
Note: The arrangements by
which the data are provided shall be laid down in the rules for
using the railway infrastructure."
Chapter 1.5
1.5.1.1 In the first
sentence, replace "For the purpose of adapting the requirements
of RID to technological and industrial developments, the
competent authorities" with "The competent authorities".
Chapter 1.6
1.6.1.1 Replace "2005" and
"2004" with:
"2007" and "2006".
In footnote 8 (current footnote
7), replace "2003" with:
"2005".
In the Note, replace "consignment
note" with:
"transport document".
1.6.1.2 Amend to read as
follows:
"1.6.1.2 (a) The danger
labels and placards which until 31 December 2004 conformed
to models No. 7A, 7B, 7C, 7D or 7E prescribed up to that date may
be used until 31 December 2010.
(b) The danger labels and placards
which until 31 December 2006 conformed to model No. 5.2
prescribed up to that date may be used until 31 December
2010."
1.6.1.3 and
1.6.1.4 Replace
"consignment note" with:
"transport document".
Add a new transitional measure
1.6.1.11 to read as follows:
"1.6.1.11 Type approvals
for drums, jerricans and composite packagings made of high or
medium molecular mass polyethylene, and for high molecular mass
polyethylene IBCs, issued before 1 July 2007 in accordance
with the requirements of 6.1.6.1 (a) in force up to
31 December 2006, but which are not in accordance with the
requirements of 6.1.6.1 (a) applicable as from 1 January
2007, continue to be valid."
Add the following new transitional
measure to read as follows:
"1.6.2.4 Pressure
receptacles designed and constructed in accordance with technical
codes no longer recognized according to 6.2.3 may still be
used."
Insert a new sub-section 1.6.2.5
to read as follows:
"1.6.2.5 Pressure
receptacles and their closures designed and constructed in
accordance with standards applicable at the time of their
construction and no longer listed in 6.2.2 or 6.2.5 may still be
used."
1.6.3.7 Replace
"61 °C" with:
"60 °C".
Add the following new transitional
measures to read as follows:
"1.6.3.15 Tank-wagons
constructed before 1 July 2007 in accordance with the
requirements in force up to 31 December 2006 but which do
not, however, conform to the requirements of 6.8.2.2.3 applicable
as from 1 January 2007 may continue to be used until the
next periodic inspection."
"1.6.3.16 For tank-wagons
and battery-wagons constructed before 1 January 2007 which
do not conform to the requirements of 4.3.2, 6.8.2.4 and 6.8.3.4
concerning the tank record, the retention of files for the tank
record shall start at the latest at the next periodic
inspection."
"1.6.3.17 Tank-wagons
intended for the carriage of substances of Class 3, packing group
I having a vapour pressure of not more than 175 kPa
(1.75 bar) (absolute) at 50 °C, constructed before
1 July 2007 in accordance with the requirements applicable
up to 31 December 2006, to which tank code L1.5BN had been
assigned in accordance with the requirements applicable up to
31 December 2006, may continue to be used for the carriage
of the substances mentioned above, until 31 December
2022."
1.6.3.25 Add the following
new paragraph at the end:
"The type of the test ("P" or "L")
required by 6.8.2.5.1 need not be added to the tank plate until
the first test after 1 January 2007 is performed."
1.6.3.26 Amend to read as
follows:
"1.6.3.26 Tank-wagons
constructed before 1 January 2007 in accordance with the
requirements in force up to 31 December 2006 but which do
not, however, conform to the requirements applicable as from
1 January 2007 regarding the marking of the external design
pressure in accordance with 6.8.2.5.1, may still be used."
1.6.3.27 Delete current
footnote 10.
Insert the following new
transitional measures:
"1.6.3.30 (Reserved)
1.6.3.31 Tank-wagons and
battery-wagons designed and constructed in accordance with
technical codes no longer recognized according to 6.8.2.7 may
still be used.
1.6.3.32 Tank-wagons
- for gases of Class 2 with
classification codes containing the letter(s) T, TF, TC, TO, TFC
or TOC, and
- for substances of classes 3 to 8
to which tank code L15CH, L15DH or L21DH is assigned in column
(12) of Table A of Chapter 3.2,
constructed before 1 January 2007
and which do not conform to the applicable requirements of
special provision TE 25 of 6.8.4 (b) in force from 1 January
2007 may still be used.
Tank-wagons for the carriage of
gases UN 1017 chlorine, UN 1749 chlorine trifluoride, UN 2189
dichlorosilane, UN 2901 bromine chloride and UN 3057
trifluoroacetyl chloride, whose wall thickness of the ends does
not meet the requirements of special provision TE 25 (b),
shall however be fitted with devices in accordance with special
provision TE 25 (a), (c) or (d) by 1 January 2015.
1.6.3.33 to
1.6.3.40 (Reserved)".
1.6.4 Amend the title to
read as follows:
"Tank-containers, portable
tanks and MEGCs".
1.6.4.4 Replace
"61 °C" with:
"60 °C".
1.6.4.6 Amend to read as
follows:
"Tank-containers constructed
before 1 January 2007 in accordance with the requirements in
force up to 31 December 2006 but which do not, however,
conform to the requirements applicable as from 1 January
2007 regarding the marking of the external design pressure in
accordance with 6.8.2.5.1, may still be used."
1.6.4.9 Amend to read as
follows:
"1.6.4.9 Tank-containers
and MEGCs designed and constructed in accordance with technical
codes no longer recognized according to 6.8.2.7 may still be
used."
1.6.4.12 Add a new
sentence, at the end, to read as follows:
"Until the relevant code marking
has been carried out, the proper shipping name of the substance
carried10) shall be indicated on the tank-container
itself or on a plate."
_____
10 The proper shipping
name may be replaced by a generic name grouping substances of a
similar nature and also compatible with the characteristics of
the tank.
1.6.4.15 Add the following
new paragraph at the end:
"The type of the test ("P" or "L")
required by 6.8.2.5.1 need not be added to the tank plate until
the first test after 1 January 2007 is performed."
Add the following new transitional
measures to read as follows:
"1.6.4.17 Tank-containers
constructed before 1 July 2007 in accordance with the
requirements in force up to 31 December 2006 but which do
not conform to the requirements of 6.8.2.2.3 applicable as from
1 January 2007 may continue to be used until the next
periodic inspection."
"1.6.4.18 For
tank-containers constructed before 1 January 2007 which do
not conform to the requirements of 4.3.2, 6.8.2.4 and 6.8.3.4
concerning the tank record, the retention of files for the tank
record shall start at the latest at the next periodic
inspection."
"1.6.4.19 Tank-containers
intended for the carriage of substances of Class 3, packing group
I having a vapour pressure of not more than 175 kPa
(1.75 bar) (absolute) at 50 °C, constructed before
1 July 2007 in accordance with the requirements applicable
up to 31 December 2006, to which tank code L1.5BN had been
assigned in accordance with the requirements applicable up to
31 December 2006, may continue to be used for the carriage
of the substances mentioned above until 31 December
2016."
Insert a new sub-section 1.6.4.30
to read as follows:
"1.6.4.30 The competent
authority may continue to issue, until
31 December 2007, design approval certificates for new
designs of UN portable tanks and MEGCs which meet the
requirements of Chapter 6.7 in force up to
31 December 2006. UN portable tanks and MEGCs which do
not meet the design requirements applicable as from
1 January 2007 but which have been constructed
according to a design approval certificate which has been issued
before 1 January 2008 may continue to be used."
1.6.6.2.2 In the first
sentence, delete "until 31 December 2003" and insert "the
multilateral approval of package design;" before "the mandatory
programme of quality assurance".
Delete the sentence: "After this
date use may continue subject, additionally, to multilateral
approval of package design."
Chapter 1.7
1.7.2.2 Delete:
"and (1.4)".
1.7.2.3 Insert the
following new first sentence:
"Doses to persons shall be below
the relevant dose limits."
At the end of the second sentence
(current first sentence), replace "and doses to persons shall be
below the relevant dose limits" with:
"within the restriction that the
doses to individuals be subject to dose constraints."
1.7.2.4 Delete paragraph
(a) and renumber (b) and (c) as (a) and (b).
1.7.4.1 Insert "of
radioactive material" after "which consignments" and "applicable"
after "satisfy all the".
Delete "applicable to radioactive
material" at the end.
Chapter 1.8
1.8.3.10 Add a new second
sentence to read as follows:
"The examining body shall not be a
training provider."
1.8.3.11 b) In the fourth
and thirteenth indent, replace "consignment note" with:
"transport document".
Amend sub-section 1.8.3.12 to read
as follows:
"1.8.3.12
Examinations
1.8.3.12.1 The examination
shall consist of a written test which may be supplemented by an
oral examination.
1.8.3.12.2 The use in the
written test of documentation other than international or
national regulations is not permitted.
1.8.3.12.3 Electronic media
may be used only if provided by the examining body. There shall
be no means of a candidate introducing further data to the
electronic media provided; the candidate may only answer the
questions posed.
1.8.3.12.4 [Second sentence
of current 1.8.3.12 followed by sub-paragraphs (a) and (b)] with
the following amendments:
At the beginning of this second
sentence, replace "written examination" with "written test".
In the fifth indent, replace
"consignment note" with "transport document".
In the eight indent, replace
"consignment notes" with "transport documents".]
1.8.3.16.2 Replace
"1.8.3.12 (b)" with "1.8.3.12.4 (b)" at the end.
1.8.5.1 Amend to read as
follows:
"If a serious accident or incident
takes place during loading, filling, carriage or unloading of
dangerous goods on the territory of a Member State, the loader,
filler, carrier, consignee or if the case may be the railway
infrastructure manager, respectively, shall ascertain that a
report conforming to the model prescribed in 1.8.5.4 is made to
the competent authority of the Member State concerned.".
Chapter 1.9
1.9.3 At the end of the
section, insert a reference to the new footnote 14 which reads as
follows:
"14 The Generic
Guideline for the Calculation of Risk inherent in the Carriage of
Dangerous Goods by Rail approved by the RID Committee of Experts
on 24 November 2005 may be consulted on the OTIF website
(www.otif.org)."
Current footnote 14 becomes
15.
Chapter 1.10
1.10.4 Amend to read as
follows:
"The provisions of 1.10.1, 1.10.2
and 1.10.3 do not apply when the quantities carried in packages
in a wagon or large container do not exceed those referred to in
1.1.3.6.3. In addition, the provisions of 1.10.1, 1.10.2 and
1.10.3 do not apply when the quantities carried in tanks or in
bulk in a wagon or container do not exceed those referred to in
1.1.3.6.3."
1.10.5 For Class 6.2:
In column "substance or
article", insert "(UN Nos. 2814 and 2900)" after
"Category A".
In column "bulk", replace "(a)"
with "0".
Delete NOTE at the end of the
table.
Add a new paragraph after Table
1.10.5 to read as follows:
"1.10.6 For radioactive
material, the provisions of this Chapter are deemed to be
complied with when the provisions of the Convention on Physical
Protection of Nuclear Material and of IAEA INFCIRC/225 (Rev.4)
are applied."
Chapter 1.11
1.11 In footnote 15
(current footnote 14), delete "published by … Paris".
PART 2
Chapter 2.2
2.2.1.1.3 In the first
subparagraph, replace "2.2.1.1.7" with:
"2.2.1.1.8".
2.2.1.1.7 becomes new
2.2.1.1.8.
Insert the following new
paragraphs:
"2.2.1.1.7 Assignment of
fireworks to divisions
2.2.1.1.7.1 Fireworks shall
normally be assigned to divisions 1.1, 1.2, 1.3 and 1.4 on the
basis of test data derived from Test Series 6 of the Manual of
Tests and Criteria. However, since the range of such articles is
very extensive and the availability of test facilities may be
limited, assignment to divisions may also be made in accordance
with the procedure in 2.2.1.1.7.2.
2.2.1.1.7.2 Assignment of
fireworks to UN No. 0333, 0334, 0335 or 0336 may be made on the
basis of analogy, without the need for Test Series 6 testing, in
accordance with the default fireworks classification table in
2.2.1.1.7.5. Such assignment shall be made with the agreement of
the competent authority. Items not specified in the table shall
be classified on the basis of test data derived from Test Series
6.
NOTE 1: The addition of
other types of fireworks to column 1 of the table in 2.2.1.1.7.5
shall only be made on the basis of full test data submitted to
the UN Sub-Committee of Experts on the Transport of Dangerous
Goods for consideration.
NOTE 2: Test data derived
by competent authorities which validates, or contradicts the
assignment of fireworks specified in column 4 of the table in
2.2.1.1.7.5 to divisions in column 5 should be submitted to the
UN Sub-Committee of Experts on the Transport of Dangerous Goods
for information.
2.2.1.1.7.3 Where fireworks
of more than one hazard division are packed in the same package
they shall be classified on the basis of the highest division
unless test data derived from Test Series 6 indicate
otherwise.
2.2.1.1.7.4 The
classification shown in the table in 2.2.1.1.7.5 applies only for
articles packed in fibreboard boxes (4G).
2.2.1.1.7.5 Default
fireworks classification table1
NOTE 1: References to
percentages in the table, unless otherwise stated, are to the
mass of all pyrotechnic composition (e.g. rocket motors, lifting
charge, bursting charge and effect charge).
NOTE 2: "Flash composition"
in this table refers to pyrotechnic compositions containing an
oxidizing substance, or black powder, and a metal powder fuel
that are used to produce an aural report effect or used
as a bursting charge in fireworks devices.
NOTE 3: Dimensions in mm
refer to:
- for spherical and peanut shells
the diameter of the sphere of the shell;
- for cylinder shells the length
of the shell;
- for a shell in mortar, Roman
candle, shot tube firework or mine the inside diameter of the
tube comprising or containing the firework;
- for a bag mine or cylinder mine,
the inside diameter of the mortar intended to contain the
mine.
_______
1 This table contains a
list of firework classifications which may be used in the absence
of Test Series 6 data (see 2.2.1.1.7.2).
Type
Includes:
/ Synonym:
Definition
Specification
Classification
Shell, spherical or
cylindrical
Spherical display shell: aerial
shell, colour shell, dye shell, multi-break shell,
multi-effect shell, nautical shell, parachute shell, smoke
shell, star shell; report shell: maroon, salute, sound
shell, thunderclap, aerial shell kit
Device with or without
propellant charge, with delay fuse and bursting charge,
pyrotechnic unit(s) or loose pyrotechnic composition and
designed to be projected from a mortar
All report shells
1.1G
Colour shell:
≥ 180 mm
1.1G
Colour shell: < 180 mm
with > 25% flash composition, as loose powder and/
or report effects
1.1G
Colour shell: < 180 mm
with ≤ 25% flash composition, as loose powder and/ or
report effects
1.3G
Colour shell: ≤ 50 mm, or
≤ 60 g pyrotechnic composition, with ≤ 2% flash
composition as loose powder and/ or report effects
1.4G
Peanut shell
Device with two or more
spherical aerial shells in a common wrapper propelled by
the same propellant charge with separate external delay
fuses
The most hazardous spherical
aerial shell determines the classification
Preloaded mortar, shell in
mortar
Assembly comprising a spherical
or cylindrical shell inside a mortar from which the shell
is designed to be projected
All report shells
1.1G
Colour shell: ≥ 180 mm
1.1G
Colour shell: > 50 mm
and < 180 mm
1.2G
Colour shell:
≤ 50 mm, or < 60 g pyrotechnic
composition, with ≤ 25% flash composition as loose
powder and/ or report effects
1.3G
Shell, spherical or
cylindrical
(cont'd)
Shell of shells (spherical)
(Reference to percentages
for shell of shells are to the gross mass of the fireworks
article)
Device without propellant
charge, with delay fuse and bursting charge, containing
report shells and inert materials and designed to be
projected from a mortar
> 120 mm
1.1G
Device without propellant
charge, with delay fuse and bursting charge, containing
report shells ≤ 25g flash composition per report unit, with
≤ 33% flash composition and ≥ 60% inert materials and
designed to be projected from a mortar
≤ 120 mm
1.3G
Device without propellant
charge, with delay fuse and bursting charge, containing
colour shells and/or pyrotechnic units and designed to be
projected from a mortar
> 300 mm
1.1G
Device without propellant
charge, with delay fuse and bursting charge, containing
colour shells ≤ 70mm and/or pyrotechnic units, with ≤
25% flash composition and ≤ 60% pyrotechnic
composition and designed to be projected from a mortar
> 200 mm and
≤ 300 mm
1.3G
Device with propellant charge,
with delay fuse and bursting charge, containing colour
shells ≤ 70 mm and/or pyrotechnic units, with ≤ 25%
flash composition and ≤ 60% pyrotechnic composition
and designed to be projected from a mortar
≤ 200 mm
1.3G
Battery/ combination
Barrage, bombardos, cakes,
finale box, flowerbed, hybrid, multiple tubes, shell cakes,
banger batteries, flash banger batteries
Assembly including several
elements either containing the same type or several types
each corresponding to one of the types of fireworks listed
in this table, with one or two points of ignition
The most hazardous firework
type determines the classification
Roman candle
Exhibition candle, candle,
bombettes
Tube containing a series of
pyrotechnic units consisting of alternate pyrotechnic
composition, propellant charge, and transmitting fuse
≥ 50 mm inner diameter,
containing flash composition, or <50 mm with >25%
flash composition
1.1G
≥ 50 mm inner diameter,
containing no flash composition
1.2G
< 50 mm inner
diameter and ≤ 25% flash composition
1.3G
≤ 30 mm inner
diameter, each pyrotechnic unit ≤ 25 g and
≤ 5% flash composition
1.4G
Shot tube
Single shot Roman candle, small
preloaded mortar
Tube containing a pyrotechnic
unit consisting of pyrotechnic composition, propellant
charge with or without transmitting fuse
≤ 30 mm inner
diameter and pyrotechnic unit > 25 g, or >
5% and ≤ 25% flash composition
1.3G
≤ 30 mm inner
diameter, pyrotechnic unit ≤ 25 g and ≤ 5%
flash composition
1.4G
Rocket
Avalanche rocket, signal
rocket, whistling rocket, bottle rocket, sky rocket,
missile type rocket, table rocket
Tube containing pyrotechnic
composition and/or pyrotechnic units, equipped with
stick(s) or other means for stabilization of flight, and
designed to be propelled into the air
Flash composition effects
only
1.1G
Flash composition > 25%
of the pyrotechnic composition
1.1G
> 20 g pyrotechnic
composition and flash composition ≤ 25 %
1.3G
≤ 20 g pyrotechnic
composition, black powder bursting charge and ≤ 0.13 g
flash composition per report and ≤ 1 g in total
1.4G
Mine
Pot-a-feu, ground mine, bag
mine, cylinder mine
Tube containing propellant
charge and pyrotechnic units and designed to be placed on
the ground or to be fixed in the ground. The principal
effect is ejection of all the pyrotechnic units in a single
burst producing a widely dispersed visual and/or aural
effect in the air or:
Cloth or paper bag or cloth or
paper cylinder containing propellant charge and pyrotechnic
units, designed to be placed in a mortar and to function as
a mine
> 25% flash composition, as
loose powder and/ or report effects
1.1G
≥ 180 mm and
≤ 25% flash composition, as loose powder and/ or
report effects
1.1G
< 180 mm and ≤ 25%
flash composition, as loose powder and/ or report
effects
1.3G
≤ 150 g pyrotechnic
composition, containing ≤ 5% flash composition as
loose powder and/ or report effects. Each pyrotechnic unit
≤ 25 g, each report effect < 2g ; each
whistle, if any, ≤ 3 g
1.4G
Fountain
Volcanos, gerbs, showers,
lances, Bengal fire, flitter sparkle, cylindrical
fountains, cone fountains, illuminating torch
Non-metallic case containing
pressed or consolidated pyrotechnic composition producing
sparks and flame
≥ 1 kg pyrotechnic
composition
1.3G
< 1 kg pyrotechnic
composition
1.4G
Sparkler
Handheld sparklers,
non-handheld sparklers, wire sparklers
Rigid wire partially coated
(along one end) with slow burning pyrotechnic composition
with or without an ignition tip
Perchlorate based sparklers:
> 5 g per item or > 10 items per pack
1.3G
Perchlorate based sparklers:
≤ 5 g per item and ≤ 10 items per pack;
Nitrate based sparklers:
≤ 30 g per item
1.4G
Bengal stick
Dipped stick
Non-metallic stick partially
coated (along one end) with slow-burning pyrotechnic
composition and designed to be held in the hand
Perchlorate based items: > 5
g per item or > 10 items per pack
1.3 G
Perchlorate based items:
≤ 5 g per item and ≤ 10 items per pack; nitrate based
items: ≤ 30 g per item
1.4G
Low hazard fireworks and
novelties
Table bombs, throwdowns,
crackling granules, smokes, fog, snakes, glow worm,
serpents, snaps, party poppers
Device designed to produce very
limited visible and/ or audible effect which contains small
amounts of pyrotechnic and/ or explosive composition.
Throwdowns and snaps may
contain up to 1.6 mg of silver fulminate; snaps and party
poppers may contain up to 16 mg of potassium chlorate/ red
phosphorous mixture; other articles may contain up to
5 g of pyrotechnic composition, but no flash
composition
1.4G
Spinner
Aerial spinner, helicopter,
chaser, ground spinner
Non-metallic tube or tubes
containing gas- or spark-producing pyrotechnic composition,
with or without noise producing composition, with or
without aerofoils attached
Pyrotechnic composition per
item > 20 g, containing ≤ 3% flash
composition as report effects, or whistle composition
≤ 5 g
1.3G
Pyrotechnic composition per
item ≤ 20 g, containing ≤ 3% flash
composition as report effects, or whistle composition
≤ 5 g
1.4G
Wheels
Catherine wheels, Saxon
Assembly including drivers
containing pyrotechnic composition and provided with a
means of attaching it to a support so that it can
rotate
≥ 1 kg total
pyrotechnic composition, no report effect, each whistle (if
any) ≤ 25 g and ≤ 50 g whistle
composition per wheel
1.3G
< 1 kg total
pyrotechnic composition, no report effect, each whistle (if
any) ≤ 5 g and ≤ 10 g whistle
composition per wheel
1.4G
Aerial wheel
Flying Saxon, UFO's, rising
crown
Tubes containing propellant
charges and sparks- flame- and/ or noise producing
pyrotechnic compositions, the tubes being fixed to a
supporting ring
> 200 g total
pyrotechnic composition or > 60 g pyrotechnic
composition per driver, ≤ 3% flash composition as
report effects, each whistle (if any) ≤ 25 g and
≤ 50 g whistle composition per wheel
1.3G
≤ 200 g total
pyrotechnic composition and ≤ 60 g pyrotechnic
composition per driver, ≤ 3% flash composition as
report effects, each whistle (if any) ≤ 5 g and
≤ 10 g whistle composition per wheel
1.4G
Selection pack
Display selection box, display
selection pack, garden selection box, indoor selection box;
assortment
A pack of more than one type
each corresponding to one of the types of fireworks listed
in this table
The most hazardous firework
type determines the classification
Firecracker
Celebration cracker,
celebration roll, string cracker
Assembly of tubes (paper or
cardboard) linked by a pyrotechnic fuse, each tube intended
to produce an aural effect
Each tube ≤ 140 mg of
flash composition or ≤ 1 g black powder
1.4G
Banger
Salute, flash banger, lady
cracker
Non-metallic tube containing
report composition intended to produce an aural effect
> 2 g flash composition per
item
1.1G
≤ 2 g flash
composition per item and ≤ 10 g per inner packaging
1.3G
≤ 1 g flash
composition per item and ≤ 10 g per inner
packaging or ≤ 10 g black powder per item
1.4G
2.2.2.1.5 Under the heading
"Oxidizing gases", replace "see ISO 10156:1996" with:
"see ISO 10156:1996 and
ISO 10156-2:2005".
2.2.3.1.1 Replace
"61 °C" with "60 °C" (three times).
2.2.3.1.2 Replace
"61 °C" with "60 °C" (twice).
2.2.3.1.3 Replace
"61 °C" with "60 °C".
2.2.3.3 Under
classification code "F2" for UN 3256, replace "61 °C"
with:
"60 °C".
Under classification code "FC",
add at the beginning:
"3469 PAINT, FLAMMABLE, CORROSIVE
(including paint, lacquer, enamel, stain, shellac, varnish,
polish, liquid filler and liquid lacquer base) or
3469 PAINT RELATED MATERIAL,
FLAMMABLE, CORROSIVE (including paint thinning or reducing
compound)".
2.2.41.1.9 Amend (b) to
read as follows:
"(b) they are oxidizing substances
according to the classification procedure for Class 5.1 (see
2.2.51.1) except that mixtures of oxidizing substances which
contain 5.0% or more of combustible organic substances shall be
subjected to the classification procedure defined in Note
2;".
Add a new NOTE 2 to read as
follows and renumber the following Notes accordingly:
"NOTE 2: Mixtures of
oxidizing substances meeting the criteria of Class 5.1 which
contain 5.0% or more of combustible organic substances, which do
not meet the criteria mentioned in (a), (c), (d) or (e) above,
shall be subjected to the self-reactive substance classification
procedure.
A mixture showing the properties
of a self-reactive substance, type B to F, shall be classified as
a self-reactive substance of Class 4.1.
A mixture showing the properties
of a self-reactive substance, type G, according to the principle
given in sub-section 20.4.3 (g) of Part II of the Manual of
Tests and Criteria shall be considered for classification as a
substance of Class 5.1 (see 2.2.51.1)."
2.2.41.4 Add the following
new entry to the table:
Self-reactive substance
Concentration (%)
Packing method
UN generic entry
Remarks
ACETONE-PYROGALLOL COPOLYMER
2-DIAZO-1-NAPHTHOL-5-SULPHONATE
100
OP8
3228
2.2.42.3 Under classification code "SW"
delete:
"2445 LITHIUM ALKYLS, LIQUID
3433 LITHIUM ALKYLS, SOLID
3051 ALUMINIUM ALKYLS
3052 ALUMINIUM ALKYL HALIDES,
LIQUID
3461 ALUMINIUM ALKYL HALIDES,
SOLID
3053 MAGNESIUM ALKYLS
3076 ALUMINIUM ALKYL
HYDRIDES".
2.2.61.1.7 Amend the table
to read as follows:
Packing group
Oral toxicity
LD50
(mg/kg)
Dermal toxicity
LD50 (mg/kg)
Inhalation
toxicity
by dusts and mists
LC50
(mg/l)
I
≤ 5.0
≤ 50
≤ 0.2
II
> 5.0 and ≤ 50
> 50 and ≤ 200
> 0.2 and ≤ 2.0
IIIa
> 50 and ≤ 300
> 200 and ≤ 1000
> 2.0 and ≤ 4.0
2.2.61.3 In footnote (k),
replace "61 °C" with:
"60 °C".
2.2.62.1.3 Amend the
definition of "cultures" to read as follows:
"Cultures" are the result
of a process by which pathogens are intentionally propagated.
This definition does not include human or animal patient
specimens as defined in this paragraph;".
Add a new definition to read as
follows:
"Patient specimens" are
human or animal materials, collected directly from humans or
animals, including, but not limited to, excreta, secreta, blood
and its components, tissue and tissue fluid swabs, and body parts
being carried for purposes such as research, diagnosis,
investigational activities, disease treatment and
prevention."
2.2.62.1.4 Insert ", UN
3291" after "UN 2900".
2.2.62.1.4.1 In the first
sentence, replace "disease to humans or animals" with "disease in
otherwise healthy humans or animals".
In the Table with the indicative
examples:
Under UN 2814:
- In the entry for "Crimean-Congo
hemorrhagic fever virus", replace "hemorrhagic" with
"haemorrhagic".
- Insert an asterisk * after
entries "Escherichia coli (verotoxigenic) (cultures only)",
"Mycobacterium tuberculosis (cultures only)" and "Shigella
dysenteriae type I (cultures only)".
Insert a new Note after the table
to read as follows:
"* Nevertheless, when the cultures
are intended for diagnostic or clinical purposes, they may be
classified as infectious substances of Category B."
- Replace "Hantaviruses causing
hantavirus pulmonary syndrome" with:
"Hantavirus causing haemorrhagic
fever with renal syndrome".
- In the entry for "Omsk
hemorrhagic fever virus", replace "hemorrhagic" with
"haemorrhagic".
- Add "(cultures only)" after
"Rabies virus", "Rift Valley fever virus" and "Venezuelan equine
encephalitis virus".
Under UN 2900:
- Delete "African horse sickness
virus" and "Bluetongue virus".
- Insert "Velogenic" before
"Newcastle disease virus".
- Add "(cultures only)" after each
microorganism in the list.
2.2.62.1.4.2 Delete "except
that cultures, as defined in 2.2.62.1.3, shall be assigned to
UN 2814 or UN 2900 as appropriate".
In the Note amend the proper
shipping name to read:
"BIOLOGICAL SUBSTANCE, CATEGORY
B".
2.2.62.1.5 Amend to read as
follows:
"2.2.62.1.5
Exemptions
2.2.62.1.5.1 [Text of
current 2.2.62.1.5]
2.2.62.1.5.2 Substances
containing microorganisms which are non-pathogenic to humans or
animals are not subject to RID unless they meet the criteria for
inclusion in another class.
2.2.62.1.5.3 Substances in
a form that any present pathogens have been neutralized or
inactivated such that they no longer pose a health risk are not
subject to RID unless they meet the criteria for inclusion in
another class.
2.2.62.1.5.4 Substances
where the concentration of pathogens is at a level naturally
encountered (including foodstuff and water samples) and which are
not considered to pose a significant risk of infection are not
subject to RID unless they meet the criteria for inclusion in
another class.
2.2.62.1.5.5 [Text of
current 2.2.62.1.6. Amend the beginning of the paragraph to read
as follows:]
"Dried blood spots, collected by
applying a drop of blood onto absorbent material, or faecal
occult blood screening tests and blood or blood components
…".
2.2.62.1.5.6 Human or
animal specimens for which there is minimal likelihood that
pathogens are present are not subject to RID if the specimen is
carried in a packaging which will prevent any leakage and which
is marked with the words "EXEMPT HUMAN SPECIMEN" or "EXEMPT
ANIMAL SPECIMEN", as appropriate.
The packaging is deemed to comply
with the above requirements if it meets the following
conditions:
(a) The packaging consists of
three components:
(i) a leak-proof primary
receptacle(s);
(ii) a leak-proof secondary
packaging; and
(iii) an outer packaging of
adequate strength for its capacity, mass and intended use, and
with at least one surface having minimum dimensions of
100 mm x 100 mm;
(b) For liquids, absorbent
material in sufficient quantity to absorb the entire contents is
be placed between the primary receptacle(s) and the secondary
packaging so that, during carriage, any release or leak of a
liquid substance will not reach the outer packaging and will not
compromise the integrity of the cushioning material;
(c) When multiple fragile primary
receptacles are placed in a single secondary packaging, they are
either individually wrapped or separated to prevent contact
between them.
NOTE: An element of
professional judgment is required to determine if a substance is
exempt under this paragraph. That judgment should be based on the
known medical history, symptoms and individual circumstances of
the source, human or animal, and endemic local conditions.
Examples of specimens which may be carried under this paragraph
include
- the blood or urine tests to
monitor cholesterol levels, blood glucose levels, hormone levels,
or prostate specific antibodies (PSA);
- those required to monitor organ
function such as heart, liver or kidney function for humans or
animals with non-infectious diseases, or for therapeutic drug
monitoring;
- those conducted for insurance or
employment purposes and are intended to determine the presence of
drugs or alcohol;
- pregnancy test;
- biopsies to detect cancer;
and
- antibody detection in humans or
animals."
2.2.62.1.6 and
2.2.62.1.7 Replace current
text with:
"(Reserved)".
2.2.62.1.8 Amend to read as
follows (current text is moved to new 2.2.62.1.12.1):
"(Reserved)".
2.2.62.1.11.1 Delete "or
containing Category B infectious substances in cultures" in the
first sentence and ", other than in cultures," in the last
sentence.
Add the following Note at the
end:
"NOTE: Medical or clinical
wastes assigned to number 18 01 03 (Wastes from human
or animal health care and/or related research - wastes from natal
care, diagnosis, treatment or prevention of disease in humans -
wastes whose collection and disposal is subject to special
requirements in order to prevent infection) or 18 02 02
(Wastes from human or animal health care and/or related research
- wastes from research, diagnosis, treatment or prevention of
disease involving animals - wastes whose collection and disposal
is subject to special requirements in order to prevent infection)
according to the list of wastes annexed to the Commission
Decision 2000/532/EC4 as amended, shall be classified
according to the provisions set out in this paragraph, based on
the medical or veterinary diagnosis concerning the patient or the
animal.
_____
4 Commission Decision
2000/532/EC of 3 May 2000 replacing Decision 94/3/EC
establishing a list of wastes pursuant to Article 1(a) of Council
Directive 75/442/EEC on waste and Council Decision 94/904/EC
establishing a list of hazardous waste pursuant to Article 1(4)
of Council Directive 91/689/EEC on hazardous waste (Official
Journal of the European Communities No. L 226 of 6 September
2000, page 3)."
2.2.62.1.11.2 Existing NOTE
becomes NOTE 1. Add a new NOTE 2 to read as follows:
"NOTE 2: Notwithstanding
the classification criteria set out above, medical or clinical
wastes assigned to number 18 01 04 (Wastes from human
or animal health care and/or related research - wastes from natal
care, diagnosis, treatment or prevention of disease in humans -
wastes whose collection and disposal is not subject to special
requirements in order to prevent infection) or 18 02 03
(Wastes from human or animal health care and/or related research
- wastes from research, diagnosis, treatment or prevention of
disease involving animals - wastes whose collection and disposal
is not subject to special requirements in order to prevent
infection) according to the list of wastes annexed to the
Commission Decision 2000/532/EC4 as amended, are not
subject to the provisions of RID.
____
4 Commission Decision
2000/532/EC of 3 May 2000 replacing Decision 94/3/EC
establishing a list of wastes pursuant to Article 1(a) of Council
Directive 75/442/EEC on waste and Council Decision 94/904/EC
establishing a list of hazardous waste pursuant to Article 1(4)
of Council Directive 91/689/EEC on hazardous waste (Official
Journal of the European Communities No. L 226 of 6 September
2000, page 3)."
Current footnotes 4 to 10 become 5
to 11.
Add the following new
paragraph:
"2.2.62.1.12 Infected
animals
2.2.62.1.12.1 [Text of
current 2.2.62.1.8 adding the following new first sentence:]
"Unless an infectious substance
cannot be consigned by any other means, live animals shall not be
used to consign such a substance."
2.2.62.1.12.2 Animal
carcasses affected by pathogens of Category A or which would be
assigned to Category A in cultures only, shall be assigned to
UN 2814 or UN 2900 as appropriate.
Other animal carcasses affected by
pathogens included in Category B shall be carried in accordance
with provisions determined by the competent authority."
2.2.62.2 Replace
"2.2.62.1.8" with:
"2.2.62.1.12.1".
2.2.62.3 Under
classification code I4, amend the name for UN 3373 to read as
follows:
"BIOLOGICAL SUBSTANCE, CATEGORY
B".
2.2.7.1.2 (e) Replace "the
values specified in 2.2.7.7.2" with:
"the values specified in
2.2.7.7.2.1 (b), or calculated in accordance with 2.2.7.7.2.2 to
2.2.7.7.2.6".
2.2.7.2 In the definition
of "Multilateral approval", amend the first sentence to read as
follows:
"Multilateral approval
means approval by the relevant competent authority of the country
of origin of the design or shipment, as applicable and also,
where the consignment is to be carried through or into any other
country, approval by the competent authority of that
country."
In the definition of "Specific
activity of a radionuclide", delete:
"or volume".
In the definition of "Natural
Uranium" (under "Uranium-natural, depleted, enriched") replace
"chemically separated uranium" with:
"uranium (which may be chemically
separated)".
2.2.7.3.2 (a) Amend
paragraph (ii) to read as follows:
"(ii) natural uranium, depleted
uranium, natural thorium or their compounds or mixtures,
providing they are unirradiated and in solid or liquid
form;".
2.2.7.4.6 (a) Amend to read
as follows:
"(a) The tests prescribed in
2.2.7.4.5 (a) and (b) provided the mass of the special form
radioactive material:
(i) is less than 200 g and
they are alternatively subjected to the Class 4 impact test
prescribed in ISO 2919:1999 "Radiation protection - Sealed
radioactive sources - General requirements and classification";
or
(ii) is less than 500 g and
they are alternatively subjected to the Class 5 impact test
prescribed in ISO 2919:1999 "Radiation protection - Sealed
radioactive sources - General requirements and classification";
and".
2.2.7.4.6 (b) Replace "ISO
2919:1980" with:
"ISO 2919:1999".
2.2.7.7.1.7 Amend the
beginning of the first sentence to read:
"Unless excepted by 6.4.11.2,
packages containing …".
2.2.7.7.1.8 Amend to read
as follows:
"2.2.7.7.1.8 Packages
containing uranium hexafluoride
Packages containing uranium
hexafluoride shall not contain:
(a) a mass of uranium hexafluoride
different from that authorized for the package design;
(b) a mass of uranium hexafluoride
greater than a value that would lead to an ullage smaller than 5%
at the maximum temperature of the package as specified for the
plant systems where the package shall be used; or
(c) uranium hexafluoride other
than in solid form or at an internal pressure above atmospheric
pressure when handed over for carriage."
2.2.7.7.2.1 In the table,
amend the value in the last column for Te-121m to read "1 ×
106" instead of "1 × 105".
Amend (a) and (b) after the table
as follows:
"(a) A1 and/or
A2 values for these parent radionuclides include
contributions from daughter radionuclides with half-lives less
than 10 days, as listed in the following:
Mg-28
Al-28
Ar-42
K-42
Ca-47
Sc-47
Ti-44
Sc-44
Fe-52
Mn-52m
Fe-60
Co-60m
Zn-69m
Zn-69
Ge-68
Ga-68
Rb-83
Kr-83m
Sr-82
Rb-82
Sr-90
Y-90
Sr-91
Y-91m
Sr-92
Y-92
Y-87
Sr-87m
Zr-95
Nb-95m
Zr-97
Nb-97m, Nb-97
Mo-99
Tc-99m
Tc-95m
Tc-95
Tc-96m
Tc-96
Ru-103
Rh-103m
Ru-106
Rh-106
Pd-103
Rh-103m
Ag-108m
Ag-108
Ag-110m
Ag-110
Cd-115
In-115m
In-114m
In-114
Sn-113
In-113m
Sn-121m
Sn-121
Sn-126
Sb-126m
Te-118
Sb-118
Te-127m
Te-127
Te-129m
Te-129
Te-131m
Te-131
Te-132
I-132
I-135
Xe-135m
Xe-122
I-122
Cs-137
Ba-137m
Ba-131
Cs-131
Ba-140
La-140
Ce-144
Pr-144m, Pr-144
Pm-148m
Pm-148
Gd-146
Eu-146
Dy-166
Ho-166
Hf-172
Lu-172
W-178
Ta-178
W-188
Re-188
Re-189
Os-189m
Os-194
Ir-194
Ir-189
Os-189m
Pt-188
Ir-188
Hg-194
Au-194
Hg-195m
Hg-195
Pb-210
Bi-210
Pb-212
Bi-212, Tl-208, Po-212
Bi-210m
Tl-206
Bi-212
Tl-208, Po-212
At-211
Po-211
Rn-222
Po-218, Pb-214, At-218, Bi-214,
Po-214
Ra-223
Rn-219, Po-215, Pb-211, Bi-211,
Po-211, Tl-207
Ra-224
Rn-220, Po-216, Pb-212, Bi-212,
Tl-208, Po-212
Ra-225
Ac-225, Fr-221, At-217, Bi-213,
Tl-209, Po-213, Pb-209
Ra-226
Rn-222, Po-218, Pb-214, At-218,
Bi-214, Po-214
Ra-228
Ac-228
Ac-225
Fr-221, At-217, Bi-213, Tl-209,
Po-213, Pb-209
Ac-227
Fr-223
Th-228
Ra-224, Rn-220, Po-216, Pb-212,
Bi-212, Tl-208, Po-212
Th-234
Pa-234m, Pa-234
Pa-230
Ac-226, Th-226, Fr-222, Ra-222,
Rn-218, Po-214
U-230
Th-226, Ra-222, Rn-218,
Po-214
U-235
Th-231
Pu-241
U-237
Pu-244
U-240, Np-240m
Am-242m
Am-242, Np-238
Am-243
Np-239
Cm-247
Pu-243
Bk-249
Am-245
Cf-253
Cm-249"
b) Insert "Ag-108m Ag-108" after: "Ru-106 Rh-106".
Delete the entries for:
"Ce-134, La-134";
"Rn-220, Po-216";
"Th-226, Ra-222, Rn‑218, Po-214";
and
"U-240, Np-240m".
2.2.7.7.2.2 In the first
sentence, delete:
"competent authority approval, or
for international carriage,".
Amend the beginning of the second
sentence to read as follows:
"It is permissible to use an
A2 value calculated using a dose coefficient for the
appropriate lung absorption type as recommended by the
International Commission on Radiological Protection, if the
chemical forms of each radionuclide under both normal …".
In the table:
- Amend the second entry in the
first column to read:
"Alpha emitting nuclides but no
neutron emitters are known to be present".
- Amend the third entry in the
first column to read:
"Neutron emitting nuclides are
known to be present or no relevant data are available".
2.2.7.8.4
(d) and (e) Add at the end:
"except under the provisions of
2.2.7.8.5".
Add a new 2.2.7.8.5 to read:
"2.2.7.8.5 In case of
international carriage of packages requiring competent authority
design or shipment approval, for which different approval types
apply in the different countries concerned by the shipment,
assignment to the category as required in 2.2.7.8.4 shall be in
accordance with the certificate of the country of origin of
design."
2.2.7.9.7 Insert "Chapter
1.10" in the list of provisions which do not apply.
2.2.8.1.6 Amend the
beginning of the first sentence of the second paragraph to read
as follows:
"Liquids, and solids which may
become liquid during carriage, which are judged not to cause …"
(remainder of the sentence unchanged).
2.2.8.3 Under
classification code "C2", amend the name of UN 1740 to read as
follows:
"HYDROGENDIFLUORIDES, SOLID,
N.O.S."
Under classification code "CF1",
add at the beginning:
"3470 PAINT, CORROSIVE, FLAMMABLE
(including paint, lacquer, enamel, stain, shellac, varnish,
polish, liquid filler and liquid lacquer base) or
3470 PAINT RELATED MATERIAL,
CORROSIVE, FLAMMABLE (including paint thinning or reducing
compound)".
Under classification code "CT1",
add at the beginning:
"3471 HYDROGENDIFLUORIDES
SOLUTION, N.O.S.".
2.2.9.1.14 Replace
"61 °C" with:
"60 °C".
2.2.9.2 Amend the second
indent to read as follows:
"- Uncleaned empty containment
vessels for apparatus such as transformers, condensers and
hydraulic apparatus containing substances assigned to UN Nos.
2315, 3151, 3152 or 3432."
2.2.9.3 Under
classification code "M8", amend the name for UN 3245 to read as
follows:
"GENETICALLY MODIFIED
MICROORGANISMS or GENETICALLY MODIFIED ORGANISMS".
2.3.3.1.7,
2.3.3.1.8 and
2.3.6 Figure Replace
"61 °C" with:
"60 °C".
PART 3
Chapter 3.1
3.1.2.2 and
3.1.2.3 Replace
"consignment note" with:
"transport document".
Chapter 3.2
3.2.1 In the explanatory
note for column (5), delete the second indent.
In the explanatory note for column
(11), add the following NOTE at the end:
"NOTE: If technically
relevant, these special provisions are not only applicable to the
portable tanks specified in column (10), but also to the portable
tanks that may be used according to the table in 4.2.5.2.5."
In the explanatory note for column
(13), add the following NOTE at the end:
"NOTE: If technically
relevant, these special provisions are not only applicable to the
tanks specified in column (12), but also to the tanks that may be
used according to the hierarchies in 4.3.3.1.2 and
4.3.4.1.2."
In the explanatory note for column
(13), delete the Note in the first and third indents.
Table A
Amend Table A as follows:
Replace the code "LQ19" with "LQ7"
wherever it is listed in Column (7), except in the case of UN
2809.
(applies to UN
Nos. 1556, 1583, 1591, 1593, 1597, 1599, 1602, 1656, 1658, 1686,
1710, 1718, 1719, 1731, 1755, 1757, 1760, 1761, 1783, 1787, 1788,
1789, 1791, 1793, 1805, 1814, 1819, 1824, 1835, 1840, 1848, 1851,
1887, 1888, 1897, 1902, 1903, 1908, 1935, 1938, 2021, 2024, 2030,
2205, 2206, 2209, 2225, 2235, 2269, 2272, 2273, 2274, 2279, 2289,
2290, 2294, 2299, 2300, 2311, 2320, 2321, 2326, 2327, 2328, 2431,
2432, 2433, 2470, 2491, 2496, 2501, 2504, 2511, 2515, 2518, 2525,
2533, 2564, 2565, 2580, 2581, 2582, 2586, 2609, 2656, 2661, 2664,
2667, 2669, 2672, 2677, 2679, 2681, 2688, 2689, 2693, 2730, 2732,
2735, 2739, 2747, 2753, 2785, 2788, 2790, 2801, 2810, 2815, 2817,
2818, 2819, 2820, 2821, 2829, 2831, 2837, 2849, 2872, 2873, 2874,
2902, 2903, 2904, 2922, 2937, 2941, 2942, 2946, 2991, 2992, 2993,
2994, 2995, 2996, 2997, 2998, 3005, 3006, 3009, 3010, 3011, 3012,
3013, 3014, 3015, 3016, 3017, 3018, 3019, 3020, 3025, 3026, 3055,
3066, 3140, 3141, 3142, 3144, 3145, 3172, 3264, 3265, 3266, 3267,
3276, 3278, 3280, 3281, 3282, 3287, 3293, 3320, 3347, 3348, 3351,
3352, 3410, 3411, 3413, 3414, 3415, 3418, 3421, 3422, 3424, 3426,
3429, 3434, 3435 and 3440)
Delete the code "TE15" wherever it
is listed in Column (13).
In column (13), delete footnote *
everywhere it appears in relation to special provisions "TU38"
and "TE22".
In column (13) insert "TE25"
against the following entries:
Tanks for gases of Class 2 with
classification codes containing the letters T, TF, TC, TO, TFC or
TOC,
Tanks for substances of classes
3 to 8 with tank code L15CH, L15DH or L21DH.
UN No.
Column
Amendment
1267, 1268 and 3295
Delete the entries for which
"640P" is assigned in column (6).
1267, 1268 and 3295
6
For each entry that is
currently assigned "640A" in column (6), insert:
"649".
1133, 1139, 1169, 1197, 1210,
1263, 1266, 1267, 1268, 1286, 1287, 1308, 1863, 1866, 1989,
1993, 2059 and 3295
2
Delete "(vapour pressure at
50 °C more than 175 kPa)" for each entry that is
assigned "640A" in column (6).
6
Delete "640A" for each entry
that is assigned "640A" in column (6).
1133, 1139, 1169, 1197, 1210,
1263, 1266, 1267, 1268, 1286, 1287, 1308, 1863, 1866, 1989,
1993, 2059 and 3295
Delete the entries for which
"640B" is assigned in column (6).
1133, 1139, 1169, 1197, 1210,
1224, 1263, 1266, 1267, 1268, 1286, 1287, 1306, 1308, 1863,
1866, 1987, 1989, 1993, 1999, 3295 and 3336
2
Delete "but not more than
175 kPa" for each entry that is assigned "640C" in
column (6).
1133, 1139, 1169, 1197, 1210,
1263, 1266, 1286, 1287, 1306, 1866, 1993 and 1999
2
For each entry that is assigned
"640F" in column (6) replace "vapour pressure at
50 °C more than 175 kPa" with "boiling point not
more than 35 °C".
1133, 1139, 1169, 1197, 1210,
1263, 1266, 1286, 1287, 1306, 1866, 1993 and 1999
2
For each entry that is assigned
"640G" in column (6) replace "but not more than
175 kPa" with "boiling point of more than
35 °C".
UN No.
Column
Amendment
0015
6
Delete:
"204".
0016
6
Delete:
"204".
0303
6
Delete:
"204".
1013
6
Add:
"653".
1014
1-20
Delete the whole entry.
1015
1-20
Delete the whole entry.
1143
2
Amend the name to read as
follows:
"CROTONALDEHYDE or
CROTONALDEHYDE, STABILIZED".
6
Add:
"324".
1155
12
Replace "L1.5BN" with:
"L4BN".
1167
12
Replace "L1.5BN" with:
"L4BN".
1169, PG II and III
6
Insert:
"601" (six times).
1170, PG II and III
6
Insert:
"330 601" (twice).
9
Delete:
"PP2" (twice).
1197, PG II and III
6
Insert:
"601" (six times).
1202 (first and third
entry)
2
Replace "61 °C" with:
"60 °C".
2
Replace "EN 590:1993" with:
"EN 590:2004" (twice).
1203
(9a)
Insert "BB2" adjacent to
"IBC02" in column (8).
1218
12
Replace "L1.5BN" with:
"L4BN".
1219
6
Insert:
"601".
1263, VG I
11
Add:
"TP27".
1263, VG II
11
Add:
"TP28" (twice).
1263, VG III
11
Add:
"TP29" (twice).
1280
12
Replace "L1.5BN" with:
"L4BN".
1293, PG II and III
6
Insert:
"601" (twice).
1302
12
Replace "L1.5BN" with:
"L4BN".
1-20
Delete the whole entry.
1-20
Delete the whole entry.
1391
2
Add, at the end:
"having a flash-point above
60 °C".
6
Delete:
"282"
1463
3b
Replace "OC2" with:
"OTC".
5
Replace "5.1 + 8" with:
"5.1 + 6.1 + 8".
16
Insert:
"W11 W12".
18
After "CW24", add:
"CW28".
20
Replace "58" with:
"568".
1614
8
Insert before "P601":
"P099".
1649
2
Add, at the end:
"having a flash-point above
60 °C".
6
Delete:
"162".
1733
10
Insert:
"T3".
11
Insert:
TP33".
2
Amend the name to read as
follows:
"HYDROGENDIFLUORIDES, SOLID,
N.O.S." (twice).
2
Amend the name to read as
follows:
"FORMIC ACID with more than 85%
acid by mass".
3b
Replace "C3" with:
"CF1".
5
After "8", add:
"+3".
20
Replace " …
MI skaidrojums pēc oficiālā likuma teksta. Orientējošs, neaizstāj juridisku konsultāciju.